Industrial Vs Non Industrial Plasma Cutting Machines

Industrial vs Non-industrial Plasma machinesPlasma cutting technology is a widely used process that has gained widespread popularity for its ability to cut most forms of metal and is quite favoured for its simplicity in use. It’s versatility with its range of capabilities and applications have made it a universally accepted metal cutting process.Non-industrial Plasma Non industrial plasmas are best suited for garage users of steel fabrication who require plasma cutting perhaps 2-3 hours per day 3-4 days per week. A plasma in this class is best suited to small operations that work on mostly customised jobs. Non industrial plasma units are much cheaper to purchase than industrial plasmas but cannot tolerate the ongoing high volume that an industrial Plasma is designed for. Air plasmas and lower end conventional mechanised plasmas generally fall into the category of non-industrial plasmas.Industrial Plasma Industrial plasmas refer to plasma units geared towards high volume large production facilities that have enough work to elicit a machine to operate a full eight hour shift five days per week. Plasmas in this class usually can operate up to three eight hour shifts per day, seven days per week if necessary. If your operation fits into this category then an industrial plasma is not only preferable, but an absolute necessity.Higher end Conventional plasma and High Definition Plasmas fall into the category of industrial plasmas. With modern day advances however High definition is generally the plasma of choice due to the higher levels of automation they provide as well as the higher level of cutting proficiency they are capable of achieving.Advantages of Industrial Plasma (high definition plasma) • Lower operating Costs• Oxygen and multi-gas capability for improved• Faster Cut speeds• Improved weldability• Significantly longer consumable life• Thicker cutting capability• Quick disconnect torch• 100% duty cycle• Hi-Definition technology• Best cut quality including squarer edges and rounder holes• Mark, cut and bevel with the same consumables• More process options for optimizing cut quality• Remote (CNC) gas switching capability• Patent TruHole technology for best plasma cut holes – unique to Hypertherm high definition plasmas• Hdi thin stainless technology• Optimal gas mixing for mid-range stainless steel• Higher pierce capability• Much higher automation• Higher resale value• Much longer life on machine• Significantly higher production capability• Significantly higher computer aided design capabilityEssential components of an Industrial plasma cutting machine What is most essential to a plasma machines ability to provide continuous quality cutting are the ‘Controllers’ of a plasma unit. A well-engineered, well-constructed control unit is essential to providing consistent high level cutting precision and quality, carried out at high speeds over long hours. A poor to average control unit is incapable of achieving consistent precision especially over long production intervals where it is likely to overheat or break down.Controllers consist of five main components: Power source, controller, a lifter, drives and servo motors.Power SourceIt is very important to get a renown plasma source for your machine to achieve a high performance and reliability to deliver consistent cut quality, high productivity, lowest operating costs whilst lasting you a long time for your business.LifterThe lifter is an essential component providing precise height control of the plasma torch. Utilising a quality THC height sensor will reduce the cut to cut cycle time (up to 60%), provides better cut quality due to proper assembly of torch height, savings on power and longer consumable life.In addition the quality torch height controllers automatically adjusts voltage for proper torch height to optimize cut quality and consumable life. Traditional torch height controls require an operator to periodically adjust arc voltage to ensure proper cut height.Control The controller needs to have all the process expertise built in resulting in flexibility and ease of use for the end user. A quality controller has a digital I/O sercos system that will deliver reliable motion system quality and will improve the cut quality and productivity.The software should allow flexibility and ease of use for the end user, so a person with little or no experience on the controller can cut like a seasoned professional in as little as a day.High End Servo Drives and motorsHigh end drives like Bosch help ensure high stiffness essential for accuracy, minimal backlash and easy adjustment. The servo drives receive command signals that amplify and transmit electric current to the servo motor in order to produce motion proportional to command signals.Their main advantage over DC and AC motors used in non-industrial plasmas is the addition of motor feedback which can be used to detect unwanted motion or to ensure the accuracy of a command motion. Servos in constant speed changing use typically have a better lifecycle than DC/AC motors and can also act as a brake by shutting off generated electricity from the motor itself.Bosch Servo motors Bosch servo motors allow for precise control of angular position, velocity and acceleration. It consists of a sophisticated motor coupled to a sensor for position feedback.Stepper motors typically used in low end CNC machines provide no feedback encoder as drive signal specifies the number of steps of movement to rotate. This lack of feedback limits performance as the stepper motor can only drive a load that is well within its capacity otherwise missed steps under load may lead to positioning errors.Low rails Industrial plasma’s usually feature low rails secured to the ground to ensure the highest level of stability driven by helical drives to provide optimal accuracy during the rapid fast moving of the plasma beam during long production intervals.Table design rails usually seen on non-industrial plasmas won’t have the same level of rigidity and are thus less suited to high volume rapid pace production. In addition with rails built onto the cutting table and so close to the plasma, with constant long duration cutting the rails are at risk of distorting in shape (over time) due to the constant exposure to heat.CAD / CAM software To greatly improve the efficiency of production in a high volume settings you require a more advanced software to provide a much wider range of functions which greatly enhance the productivity of that operation. Using a more advanced software unit can provide some of the following advantages just a to name a few:• Import CAD and CNC files• Separate multiple parts from a single CNC file• Group Parts into clusters for nesting• Automatic and manual nest sequencing• Control cut directions and cut sequencing on part by part basisThe addition of a quality software allows a much higher level of automation, significantly reducing key punching and is user friendly enough to allow even the most novice operator to cut parts like a seasoned professional.Cutting table For the purposes of industrial fabrication it is essential that a cutting table is well constructed, heavy and durable to meet the demands of an industrial operation. In most non-industrial plasma units, cutting tables are constructed from thin sheet metal and alluminium castings to reduce the cost of the overall unit. The problem with this is that due to the thin, light construction, the table can shake or wobble, adversely affecting the accuracy of a cut part. Furthermore over long production periods, due to the ongoing exposure of heat generated from the plasma these tables are likely to distort over time.The durable robust construction of an industrial plasma table is essential to give the table stability for the highest level of accuracy and to prevent heat distortion.Industrial plasma units usually offer the choice of a water or dry table with a dust collection unit. Water tables are cheaper to purchase but require much more ongoing maintenance and cleaning which over time becomes more expensive than using a dry table with a fume extraction unit. In an industrial environment both are acceptable.Non-industrial plasmas usually come with water tables once again to reduce overall the cost of the unit though some are offered with a dry table and fan which is only sufficient in removal of dust and fumes in a light fabrication setting.Having a Support team The purchase of a Plasma machine whilst being an expensive investment can provide enormous returns to any business where there is a demand for work, the correct facilities are utilised and they are maintained with the right level of care.It is essential therefore that a full support team is available to service your machine for ongoing maintenance, in the incident of a breakdown or where any other form of technical support is required.In any high volume industrial environment any down time can translate into large losses in profit so it is important to have a local service team, but more to the point a team who knows the full operation of the machine from bolt to bolt, to shorten the time required to fix the machine, though also to provide phone support for quick fixes that do not cost any call out fees.Why Non-Industrial Plasmas are so much cheaper to purchase than Industrial Plasmas Many first time buyers of Plasma machines may look into purchasing a non-industrial plasma as a form of entry level use not fully understanding the full capabilities or limitations they have especially when compared to industrial level plasmas.A cheaper price tag is often the motivator to go with a non-industrial plasma but in the long run once users have been able to thoroughly compare the two in performance, reliability and productivity it becomes very clear why non-industrial plasmas are so much cheaper.In most situations fabricators who start out using non-industrial plasmas find with ongoing use that their functional capacity is very limited and with further research and exposure to industrial plasmas that they eventually upgrade to one as they provide much greater productivity, more flexibility in use and better quality cut parts with consistent precision. In addition industrial plasmas have a much greater lifespan, are a lot more durable and are built to handle a much higher degree of volume equating to far better value.Many manufacturers of non-industrial plasma machines try to capitalise on the lower end cheap market by providing only the bare essentials of plasma cutting. Many of the reasons they can offer a plasma machine at a cheaper price is due to reasons including:- Often software is not included in the package and in many cases users need to integrate a separate laptop/PC to operate the CNC cutting function. Even when software is provided usually they only provide very basic functions.-Table and beam are constructed of thin light constructed sheet metal, not suited to heavy duty fabrication and are highly likely to distort in shape over time, due to ongoing heat exposure generated from the plasma. Rails are also built onto the table rather than being bolted into the ground.This type of design does not provide the stability required to support quality precision during fast rapid movement due to the lack of rigidity and lightness of the table construction.-Use of DC/AC motors and stepper motors as alternatives to drives and servo motors translate to limited performance, slower cutting, inconsistent poorer precision and positioning, slower acceleration and velocity.-Fume extraction units are not included and another way to reduce the price on non-industrial units. A water table or dry table with fan are usually what are provided, though with light fabrication this is usually sufficient.-Cheaper components are normally incorporated that don’t have any real brand reputation for performance or reliability.-Aside from the above non-industrial plasmas can generally operate perhaps 2-3 hours per day 4-5 days per week and have an average lifespan of about 3-5 years.Conclusion For those considering the purchase of a plasma unit it is very important to be clear on the capability of the unit and whether or not that unit can meet all their requirements not just that of a single part.Plasma machines have been designed to provide varying levels of functionality with a price range to match. Industrial plasma machines are logically more expensive but when the components are thoroughly broken down, one can clearly see that the cost is commensurate with the performance and capability, and in retrospect this is also true of non-industrial plasma machines. When matched in the suitable environment, business owners often see a return on investment within 2-3 years and as smaller businesses grow, industrial plasmas become a very natural progression.

What We Have Here Is A Failure To Communicate

The results of this past election proved once again that the Democrats had a golden opportunity to capitalize on the failings of the Trump Presidency but, fell short of a nation wide mandate. A mandate to seize the gauntlet of the progressive movement that Senator Sanders through down a little over four years ago. The opportunities were there from the very beginning even before this pandemic struck. In their failing to educate the public of the consequences of continued Congressional gridlock, conservatism, and what National Economic Reform’s Ten Articles of Confederation would do led to the results that are playing out today.. More Congressional gridlock, more conservatism and more suffering of millions of Americans are the direct consequences of the Democrats failure to communicate and educate the public. Educate the public that a progressive agenda is necessary to pull the United States out of this Pandemic, and restore this nations health and vitality.

It was the DNC’s intent in this election to only focus on the Trump Administration. They failed to grasp the urgency of the times. They also failed to communicate with the public about the dire conditions millions have been and still are facing even before the Pandemic. The billions of dollars funneled into campaign coffers should have been used to educate the voting public that creating a unified coalition would bring sweeping reforms that are so desperately needed. The reality of what transpired in a year and a half of political campaigning those billions of dollars only created more animosity and division polarizing one extreme over another.

One can remember back in 1992 Ross Perot used his own funds to go on national TV to educate the public on the dire ramifications of not addressing our national debt. That same approach should have been used during this election cycle. By using the medium of television to communicate and educate the public is the most effective way in communicating and educating the public. Had the Biden campaign and the DNC used their resources in this way the results we ae seeing today would have not created the potential for more gridlock in our government. The opportunity was there to educate the public of safety protocols during the siege of this pandemic and how National Economic Reform’s Ten Articles of Confederation provides the necessary progressive reforms that will propel the United States out of the abyss of debt and restore our economy. Restoring our economy so that every American will have the means and the availability of financial and economic security.

The failure of the Democratic party since 2016 has been recruiting a Presidential Candidate who many felt was questionable and more conservative signals that the results of today has not met with the desired results the Democratic party wanted. Then again? By not fully communicating and not educating the public on the merits of a unified progressive platform has left the United States transfixed in our greatest divides since the Civil War. This writers support of Senator Bernie Sanders is well documented. Since 2015 he has laid the groundwork for progressive reforms. He also has the foundations on which these reforms can deliver the goods as they say. But, what did the DNC do, they purposely went out of their way to engineer a candidate who was more in tune with the status-quo of the DNC. They failed to communicate to the public in educating all of us on the ways our lives would be better served with a progressive agenda that was the benchmark of Senators Sanders Presidential campaign and his Our Revolution movement. And this is way there is still really no progress in creating a less toxic environment in Washington and around the country.

Shoe Repairs And Several Other Things When I Was 7

Shoe Repairs And Several Other Things When I Was 7
My Dad repaired most of our shoes believe it or not, I can hardly believe it myself now. With 7 pairs of shoes always needing repairs I think he was quite clever to learn how to “Keep us in shoe Leather” to coin a phrase!

He bought several different sizes of cast iron cobbler’s “lasts”. Last, the old English “Laest” meaning footprint. Lasts were holding devices shaped like a human foot. I have no idea where he would have bought the shoe leather. Only that it was a beautiful creamy, shiny colour and the smell was lovely.

But I do remember our shoes turned upside down on and fitted into these lasts, my Dad cutting the leather around the shape of the shoe, and then hammering nails, into the leather shape. Sometimes we’d feel one or 2 of those nails poking through the insides of our shoes, but our dad always fixed it.

Hiking and Swimming Galas
Dad was a very outdoorsy type, unlike my mother, who was probably too busy indoors. She also enjoyed the peace and quiet when he took us off for the day!

Anyway, he often took us hiking in the mountains where we’d have a picnic of sandwiches and flasks of tea. And more often than not we went by steam train.

We loved poking our heads out of the window until our eyes hurt like mad from a blast of soot blowing back from the engine. But sore, bloodshot eyes never dampened our enthusiasm.

Dad was an avid swimmer and water polo player, and he used to take us to swimming galas, as they were called back then. He often took part in these galas. And again we always travelled by steam train.

Rowing Over To Ireland’s Eye
That’s what we did back then, we had to go by rowboat, the only way to get to Ireland’s eye, which is 15 minutes from mainland Howth. From there we could see Malahide, Lambay Island and Howth Head of course. These days you can take a Round Trip Cruise on a small cruise ship!

But we thoroughly enjoyed rowing and once there we couldn’t wait to climb the rocks, and have a swim. We picnicked and watched the friendly seals doing their thing and showing off.

Not to mention all kinds of birdlife including the Puffin.The Martello Tower was also interesting but a bit dangerous to attempt entering. I’m getting lost in the past as I write, and have to drag myself back to the present.

Fun Outings with The camera Club
Dad was also a very keen amateur photographer, and was a member of a camera Club. There were many Sunday photography outings and along with us came other kids of the members of the club.

And we always had great fun while the adults busied themselves taking photos of everything and anything, it seemed to us. Dad was so serious about his photography that he set up a dark room where he developed and printed his photographs.

All black and white at the time. He and his camera club entered many of their favourites in exhibitions throughout Europe. I’m quite proud to say that many cups and medals were won by Dad. They have been shared amongst all his grandchildren which I find quite special.

He liked taking portraits of us kids too, mostly when we were in a state of untidiness, usually during play. Dad always preferred the natural look of messy hair and clothes in the photos of his children.