Industrial vs Non-industrial Plasma machinesPlasma cutting technology is a widely used process that has gained widespread popularity for its ability to cut most forms of metal and is quite favoured for its simplicity in use. It’s versatility with its range of capabilities and applications have made it a universally accepted metal cutting process.Non-industrial Plasma Non industrial plasmas are best suited for garage users of steel fabrication who require plasma cutting perhaps 2-3 hours per day 3-4 days per week. A plasma in this class is best suited to small operations that work on mostly customised jobs. Non industrial plasma units are much cheaper to purchase than industrial plasmas but cannot tolerate the ongoing high volume that an industrial Plasma is designed for. Air plasmas and lower end conventional mechanised plasmas generally fall into the category of non-industrial plasmas.Industrial Plasma Industrial plasmas refer to plasma units geared towards high volume large production facilities that have enough work to elicit a machine to operate a full eight hour shift five days per week. Plasmas in this class usually can operate up to three eight hour shifts per day, seven days per week if necessary. If your operation fits into this category then an industrial plasma is not only preferable, but an absolute necessity.Higher end Conventional plasma and High Definition Plasmas fall into the category of industrial plasmas. With modern day advances however High definition is generally the plasma of choice due to the higher levels of automation they provide as well as the higher level of cutting proficiency they are capable of achieving.Advantages of Industrial Plasma (high definition plasma) • Lower operating Costs• Oxygen and multi-gas capability for improved• Faster Cut speeds• Improved weldability• Significantly longer consumable life• Thicker cutting capability• Quick disconnect torch• 100% duty cycle• Hi-Definition technology• Best cut quality including squarer edges and rounder holes• Mark, cut and bevel with the same consumables• More process options for optimizing cut quality• Remote (CNC) gas switching capability• Patent TruHole technology for best plasma cut holes – unique to Hypertherm high definition plasmas• Hdi thin stainless technology• Optimal gas mixing for mid-range stainless steel• Higher pierce capability• Much higher automation• Higher resale value• Much longer life on machine• Significantly higher production capability• Significantly higher computer aided design capabilityEssential components of an Industrial plasma cutting machine What is most essential to a plasma machines ability to provide continuous quality cutting are the ‘Controllers’ of a plasma unit. A well-engineered, well-constructed control unit is essential to providing consistent high level cutting precision and quality, carried out at high speeds over long hours. A poor to average control unit is incapable of achieving consistent precision especially over long production intervals where it is likely to overheat or break down.Controllers consist of five main components: Power source, controller, a lifter, drives and servo motors.Power SourceIt is very important to get a renown plasma source for your machine to achieve a high performance and reliability to deliver consistent cut quality, high productivity, lowest operating costs whilst lasting you a long time for your business.LifterThe lifter is an essential component providing precise height control of the plasma torch. Utilising a quality THC height sensor will reduce the cut to cut cycle time (up to 60%), provides better cut quality due to proper assembly of torch height, savings on power and longer consumable life.In addition the quality torch height controllers automatically adjusts voltage for proper torch height to optimize cut quality and consumable life. Traditional torch height controls require an operator to periodically adjust arc voltage to ensure proper cut height.Control The controller needs to have all the process expertise built in resulting in flexibility and ease of use for the end user. A quality controller has a digital I/O sercos system that will deliver reliable motion system quality and will improve the cut quality and productivity.The software should allow flexibility and ease of use for the end user, so a person with little or no experience on the controller can cut like a seasoned professional in as little as a day.High End Servo Drives and motorsHigh end drives like Bosch help ensure high stiffness essential for accuracy, minimal backlash and easy adjustment. The servo drives receive command signals that amplify and transmit electric current to the servo motor in order to produce motion proportional to command signals.Their main advantage over DC and AC motors used in non-industrial plasmas is the addition of motor feedback which can be used to detect unwanted motion or to ensure the accuracy of a command motion. Servos in constant speed changing use typically have a better lifecycle than DC/AC motors and can also act as a brake by shutting off generated electricity from the motor itself.Bosch Servo motors Bosch servo motors allow for precise control of angular position, velocity and acceleration. It consists of a sophisticated motor coupled to a sensor for position feedback.Stepper motors typically used in low end CNC machines provide no feedback encoder as drive signal specifies the number of steps of movement to rotate. This lack of feedback limits performance as the stepper motor can only drive a load that is well within its capacity otherwise missed steps under load may lead to positioning errors.Low rails Industrial plasma’s usually feature low rails secured to the ground to ensure the highest level of stability driven by helical drives to provide optimal accuracy during the rapid fast moving of the plasma beam during long production intervals.Table design rails usually seen on non-industrial plasmas won’t have the same level of rigidity and are thus less suited to high volume rapid pace production. In addition with rails built onto the cutting table and so close to the plasma, with constant long duration cutting the rails are at risk of distorting in shape (over time) due to the constant exposure to heat.CAD / CAM software To greatly improve the efficiency of production in a high volume settings you require a more advanced software to provide a much wider range of functions which greatly enhance the productivity of that operation. Using a more advanced software unit can provide some of the following advantages just a to name a few:• Import CAD and CNC files• Separate multiple parts from a single CNC file• Group Parts into clusters for nesting• Automatic and manual nest sequencing• Control cut directions and cut sequencing on part by part basisThe addition of a quality software allows a much higher level of automation, significantly reducing key punching and is user friendly enough to allow even the most novice operator to cut parts like a seasoned professional.Cutting table For the purposes of industrial fabrication it is essential that a cutting table is well constructed, heavy and durable to meet the demands of an industrial operation. In most non-industrial plasma units, cutting tables are constructed from thin sheet metal and alluminium castings to reduce the cost of the overall unit. The problem with this is that due to the thin, light construction, the table can shake or wobble, adversely affecting the accuracy of a cut part. Furthermore over long production periods, due to the ongoing exposure of heat generated from the plasma these tables are likely to distort over time.The durable robust construction of an industrial plasma table is essential to give the table stability for the highest level of accuracy and to prevent heat distortion.Industrial plasma units usually offer the choice of a water or dry table with a dust collection unit. Water tables are cheaper to purchase but require much more ongoing maintenance and cleaning which over time becomes more expensive than using a dry table with a fume extraction unit. In an industrial environment both are acceptable.Non-industrial plasmas usually come with water tables once again to reduce overall the cost of the unit though some are offered with a dry table and fan which is only sufficient in removal of dust and fumes in a light fabrication setting.Having a Support team The purchase of a Plasma machine whilst being an expensive investment can provide enormous returns to any business where there is a demand for work, the correct facilities are utilised and they are maintained with the right level of care.It is essential therefore that a full support team is available to service your machine for ongoing maintenance, in the incident of a breakdown or where any other form of technical support is required.In any high volume industrial environment any down time can translate into large losses in profit so it is important to have a local service team, but more to the point a team who knows the full operation of the machine from bolt to bolt, to shorten the time required to fix the machine, though also to provide phone support for quick fixes that do not cost any call out fees.Why Non-Industrial Plasmas are so much cheaper to purchase than Industrial Plasmas Many first time buyers of Plasma machines may look into purchasing a non-industrial plasma as a form of entry level use not fully understanding the full capabilities or limitations they have especially when compared to industrial level plasmas.A cheaper price tag is often the motivator to go with a non-industrial plasma but in the long run once users have been able to thoroughly compare the two in performance, reliability and productivity it becomes very clear why non-industrial plasmas are so much cheaper.In most situations fabricators who start out using non-industrial plasmas find with ongoing use that their functional capacity is very limited and with further research and exposure to industrial plasmas that they eventually upgrade to one as they provide much greater productivity, more flexibility in use and better quality cut parts with consistent precision. In addition industrial plasmas have a much greater lifespan, are a lot more durable and are built to handle a much higher degree of volume equating to far better value.Many manufacturers of non-industrial plasma machines try to capitalise on the lower end cheap market by providing only the bare essentials of plasma cutting. Many of the reasons they can offer a plasma machine at a cheaper price is due to reasons including:- Often software is not included in the package and in many cases users need to integrate a separate laptop/PC to operate the CNC cutting function. Even when software is provided usually they only provide very basic functions.-Table and beam are constructed of thin light constructed sheet metal, not suited to heavy duty fabrication and are highly likely to distort in shape over time, due to ongoing heat exposure generated from the plasma. Rails are also built onto the table rather than being bolted into the ground.This type of design does not provide the stability required to support quality precision during fast rapid movement due to the lack of rigidity and lightness of the table construction.-Use of DC/AC motors and stepper motors as alternatives to drives and servo motors translate to limited performance, slower cutting, inconsistent poorer precision and positioning, slower acceleration and velocity.-Fume extraction units are not included and another way to reduce the price on non-industrial units. A water table or dry table with fan are usually what are provided, though with light fabrication this is usually sufficient.-Cheaper components are normally incorporated that don’t have any real brand reputation for performance or reliability.-Aside from the above non-industrial plasmas can generally operate perhaps 2-3 hours per day 4-5 days per week and have an average lifespan of about 3-5 years.Conclusion For those considering the purchase of a plasma unit it is very important to be clear on the capability of the unit and whether or not that unit can meet all their requirements not just that of a single part.Plasma machines have been designed to provide varying levels of functionality with a price range to match. Industrial plasma machines are logically more expensive but when the components are thoroughly broken down, one can clearly see that the cost is commensurate with the performance and capability, and in retrospect this is also true of non-industrial plasma machines. When matched in the suitable environment, business owners often see a return on investment within 2-3 years and as smaller businesses grow, industrial plasmas become a very natural progression.
Discover the Secrets to the Best Natural Skin Care Methods
Treating skin properly is something that everyone should be concerned with. You should be aware that proper skin care can also reap benefits that go beyond beautiful-looking skin. There are a number of ways to perform regular skin maintenance. Yet natural skin care has emerged as a way to avoid perfumes and other chemicals that supposedly treat the skin, but potentially can harm it. In the UK, the best natural skin care methods can involve some unorthodox measures – but primarily is easy to accomplish if you’re dedicated to better skin and better overall health.One recommended method to enhance the skin involves the sustenance that goes into the body every day. Plenty of people find that they need to observe a better diet anyway, yet many may be unaware that a proper diet might just lead to improved skin health, as well. The first and foremost staple in a healthy diet is plentiful amounts of water. We all need a large (though not excessive) daily water intake to boost our body’s waste disposal systems. Not only can lack of hydration lead to constipation of the body…it can “constipate” the skin, as well, through clogged pores and the like. In addition, one should be certain they are eating right. In many cases, when people are experiencing skin problems, the lack of certain nutrients may play a huge role in contributing to those problems. Fiber – whole grains, in particular – is vital to boosting your skin health. Be sure that you do your best to limit sugar intake, as this can hinder skin progress.One other need those who have skin issues must address is getting more exercise. In fact, getting up and doing a modest amount of daily exercise can increase circulation to the point that skin health shows improvement. The more exercise you do, the more dramatic skin improvement can be!The type of skin products that can inadvertently harm your skin can be avoided by looking into organic products. Using organic products can be a way to better your skin – and you don’t have to spend a lot to do so. Although there are companies that sell these products, you can also use items like honey and olive oil to revitalize skin.By obtaining the methods necessary to achieve the best natural skin care possible in the UK, you can see results that refresh and invigorate your skin.
S&P 500 Rallies As U.S. Dollar Pulls Back Towards Weekly Lows
Key Insights
The strong pullback in the U.S. dollar provided significant support to stocks.
Treasury yields have pulled back after touching new highs, which served as an additional positive catalyst for S&P 500.
A move above 3730 will push S&P 500 towards the resistance level at 3760.
Advertisement
Pfizer Rallies After Announcing A Huge Price Hike For Its COVID-19 Vaccines
S&P 500 is currently trying to settle above 3730 as traders’ appetite for risk is growing. The U.S. dollar has recently gained strong downside momentum as the BoJ intervened to stop the rally in USD/JPY. Weaker U.S. dollar is bullish for stocks as it increases profits of multinational companies and makes U.S. equities cheaper for foreign investors.
The leading oil services company Schlumberger is up by 9% after beating analyst estimates on both earnings and revenue. Schlumberger’s peers Baker Hughes and Halliburton have also enjoyed strong support today.
Vaccine makers Pfizer and Moderna gained strong upside momentum after Pfizer announced that it will raise the price of its coronavirus vaccine to $110 – $130 per shot.
Biggest losers today include Verizon and Twitter. Verizon is down by 5% despite beating analyst estimates on both earnings and revenue. Subscriber numbers missed estimates, and traders pushed the stock to multi-year lows.
Twitter stock moved towards the $50 level as the U.S. may conduct a security review of Musk’s purchase of the company.
From a big picture point of view, today’s rebound is broad, and most market segments are moving higher. Treasury yields have started to move lower after testing new highs, providing additional support to S&P 500. It looks that some traders are ready to bet that Fed will be less hawkish than previously expected.
S&P 500 Tests Resistance At 3730
S&P 500 has recently managed to get above the 20 EMA and is trying to settle above the resistance at 3730. RSI is in the moderate territory, and there is plenty of room to gain additional upside momentum in case the right catalysts emerge.
If S&P 500 manages to settle above 3730, it will head towards the next resistance level at 3760. A successful test of this level will push S&P 500 towards the next resistance at October highs at 3805. The 50 EMA is located in the nearby, so S&P 500 will likely face strong resistance above the 3800 level.
On the support side, the previous resistance at 3700 will likely serve as the first support level for S&P 500. In case S&P 500 declines below this level, it will move towards the next support level at 3675. A move below 3675 will push S&P 500 towards the support at 3640.