Industrial Vs Non Industrial Plasma Cutting Machines

Industrial vs Non-industrial Plasma machinesPlasma cutting technology is a widely used process that has gained widespread popularity for its ability to cut most forms of metal and is quite favoured for its simplicity in use. It’s versatility with its range of capabilities and applications have made it a universally accepted metal cutting process.Non-industrial Plasma Non industrial plasmas are best suited for garage users of steel fabrication who require plasma cutting perhaps 2-3 hours per day 3-4 days per week. A plasma in this class is best suited to small operations that work on mostly customised jobs. Non industrial plasma units are much cheaper to purchase than industrial plasmas but cannot tolerate the ongoing high volume that an industrial Plasma is designed for. Air plasmas and lower end conventional mechanised plasmas generally fall into the category of non-industrial plasmas.Industrial Plasma Industrial plasmas refer to plasma units geared towards high volume large production facilities that have enough work to elicit a machine to operate a full eight hour shift five days per week. Plasmas in this class usually can operate up to three eight hour shifts per day, seven days per week if necessary. If your operation fits into this category then an industrial plasma is not only preferable, but an absolute necessity.Higher end Conventional plasma and High Definition Plasmas fall into the category of industrial plasmas. With modern day advances however High definition is generally the plasma of choice due to the higher levels of automation they provide as well as the higher level of cutting proficiency they are capable of achieving.Advantages of Industrial Plasma (high definition plasma) • Lower operating Costs• Oxygen and multi-gas capability for improved• Faster Cut speeds• Improved weldability• Significantly longer consumable life• Thicker cutting capability• Quick disconnect torch• 100% duty cycle• Hi-Definition technology• Best cut quality including squarer edges and rounder holes• Mark, cut and bevel with the same consumables• More process options for optimizing cut quality• Remote (CNC) gas switching capability• Patent TruHole technology for best plasma cut holes – unique to Hypertherm high definition plasmas• Hdi thin stainless technology• Optimal gas mixing for mid-range stainless steel• Higher pierce capability• Much higher automation• Higher resale value• Much longer life on machine• Significantly higher production capability• Significantly higher computer aided design capabilityEssential components of an Industrial plasma cutting machine What is most essential to a plasma machines ability to provide continuous quality cutting are the ‘Controllers’ of a plasma unit. A well-engineered, well-constructed control unit is essential to providing consistent high level cutting precision and quality, carried out at high speeds over long hours. A poor to average control unit is incapable of achieving consistent precision especially over long production intervals where it is likely to overheat or break down.Controllers consist of five main components: Power source, controller, a lifter, drives and servo motors.Power SourceIt is very important to get a renown plasma source for your machine to achieve a high performance and reliability to deliver consistent cut quality, high productivity, lowest operating costs whilst lasting you a long time for your business.LifterThe lifter is an essential component providing precise height control of the plasma torch. Utilising a quality THC height sensor will reduce the cut to cut cycle time (up to 60%), provides better cut quality due to proper assembly of torch height, savings on power and longer consumable life.In addition the quality torch height controllers automatically adjusts voltage for proper torch height to optimize cut quality and consumable life. Traditional torch height controls require an operator to periodically adjust arc voltage to ensure proper cut height.Control The controller needs to have all the process expertise built in resulting in flexibility and ease of use for the end user. A quality controller has a digital I/O sercos system that will deliver reliable motion system quality and will improve the cut quality and productivity.The software should allow flexibility and ease of use for the end user, so a person with little or no experience on the controller can cut like a seasoned professional in as little as a day.High End Servo Drives and motorsHigh end drives like Bosch help ensure high stiffness essential for accuracy, minimal backlash and easy adjustment. The servo drives receive command signals that amplify and transmit electric current to the servo motor in order to produce motion proportional to command signals.Their main advantage over DC and AC motors used in non-industrial plasmas is the addition of motor feedback which can be used to detect unwanted motion or to ensure the accuracy of a command motion. Servos in constant speed changing use typically have a better lifecycle than DC/AC motors and can also act as a brake by shutting off generated electricity from the motor itself.Bosch Servo motors Bosch servo motors allow for precise control of angular position, velocity and acceleration. It consists of a sophisticated motor coupled to a sensor for position feedback.Stepper motors typically used in low end CNC machines provide no feedback encoder as drive signal specifies the number of steps of movement to rotate. This lack of feedback limits performance as the stepper motor can only drive a load that is well within its capacity otherwise missed steps under load may lead to positioning errors.Low rails Industrial plasma’s usually feature low rails secured to the ground to ensure the highest level of stability driven by helical drives to provide optimal accuracy during the rapid fast moving of the plasma beam during long production intervals.Table design rails usually seen on non-industrial plasmas won’t have the same level of rigidity and are thus less suited to high volume rapid pace production. In addition with rails built onto the cutting table and so close to the plasma, with constant long duration cutting the rails are at risk of distorting in shape (over time) due to the constant exposure to heat.CAD / CAM software To greatly improve the efficiency of production in a high volume settings you require a more advanced software to provide a much wider range of functions which greatly enhance the productivity of that operation. Using a more advanced software unit can provide some of the following advantages just a to name a few:• Import CAD and CNC files• Separate multiple parts from a single CNC file• Group Parts into clusters for nesting• Automatic and manual nest sequencing• Control cut directions and cut sequencing on part by part basisThe addition of a quality software allows a much higher level of automation, significantly reducing key punching and is user friendly enough to allow even the most novice operator to cut parts like a seasoned professional.Cutting table For the purposes of industrial fabrication it is essential that a cutting table is well constructed, heavy and durable to meet the demands of an industrial operation. In most non-industrial plasma units, cutting tables are constructed from thin sheet metal and alluminium castings to reduce the cost of the overall unit. The problem with this is that due to the thin, light construction, the table can shake or wobble, adversely affecting the accuracy of a cut part. Furthermore over long production periods, due to the ongoing exposure of heat generated from the plasma these tables are likely to distort over time.The durable robust construction of an industrial plasma table is essential to give the table stability for the highest level of accuracy and to prevent heat distortion.Industrial plasma units usually offer the choice of a water or dry table with a dust collection unit. Water tables are cheaper to purchase but require much more ongoing maintenance and cleaning which over time becomes more expensive than using a dry table with a fume extraction unit. In an industrial environment both are acceptable.Non-industrial plasmas usually come with water tables once again to reduce overall the cost of the unit though some are offered with a dry table and fan which is only sufficient in removal of dust and fumes in a light fabrication setting.Having a Support team The purchase of a Plasma machine whilst being an expensive investment can provide enormous returns to any business where there is a demand for work, the correct facilities are utilised and they are maintained with the right level of care.It is essential therefore that a full support team is available to service your machine for ongoing maintenance, in the incident of a breakdown or where any other form of technical support is required.In any high volume industrial environment any down time can translate into large losses in profit so it is important to have a local service team, but more to the point a team who knows the full operation of the machine from bolt to bolt, to shorten the time required to fix the machine, though also to provide phone support for quick fixes that do not cost any call out fees.Why Non-Industrial Plasmas are so much cheaper to purchase than Industrial Plasmas Many first time buyers of Plasma machines may look into purchasing a non-industrial plasma as a form of entry level use not fully understanding the full capabilities or limitations they have especially when compared to industrial level plasmas.A cheaper price tag is often the motivator to go with a non-industrial plasma but in the long run once users have been able to thoroughly compare the two in performance, reliability and productivity it becomes very clear why non-industrial plasmas are so much cheaper.In most situations fabricators who start out using non-industrial plasmas find with ongoing use that their functional capacity is very limited and with further research and exposure to industrial plasmas that they eventually upgrade to one as they provide much greater productivity, more flexibility in use and better quality cut parts with consistent precision. In addition industrial plasmas have a much greater lifespan, are a lot more durable and are built to handle a much higher degree of volume equating to far better value.Many manufacturers of non-industrial plasma machines try to capitalise on the lower end cheap market by providing only the bare essentials of plasma cutting. Many of the reasons they can offer a plasma machine at a cheaper price is due to reasons including:- Often software is not included in the package and in many cases users need to integrate a separate laptop/PC to operate the CNC cutting function. Even when software is provided usually they only provide very basic functions.-Table and beam are constructed of thin light constructed sheet metal, not suited to heavy duty fabrication and are highly likely to distort in shape over time, due to ongoing heat exposure generated from the plasma. Rails are also built onto the table rather than being bolted into the ground.This type of design does not provide the stability required to support quality precision during fast rapid movement due to the lack of rigidity and lightness of the table construction.-Use of DC/AC motors and stepper motors as alternatives to drives and servo motors translate to limited performance, slower cutting, inconsistent poorer precision and positioning, slower acceleration and velocity.-Fume extraction units are not included and another way to reduce the price on non-industrial units. A water table or dry table with fan are usually what are provided, though with light fabrication this is usually sufficient.-Cheaper components are normally incorporated that don’t have any real brand reputation for performance or reliability.-Aside from the above non-industrial plasmas can generally operate perhaps 2-3 hours per day 4-5 days per week and have an average lifespan of about 3-5 years.Conclusion For those considering the purchase of a plasma unit it is very important to be clear on the capability of the unit and whether or not that unit can meet all their requirements not just that of a single part.Plasma machines have been designed to provide varying levels of functionality with a price range to match. Industrial plasma machines are logically more expensive but when the components are thoroughly broken down, one can clearly see that the cost is commensurate with the performance and capability, and in retrospect this is also true of non-industrial plasma machines. When matched in the suitable environment, business owners often see a return on investment within 2-3 years and as smaller businesses grow, industrial plasmas become a very natural progression.

Nutritional Supplements – Are They Truly Necessary?

Find out if nutritional supplements are truly necessary for good health and whyNutritional supplements, vitamins and minerals taken to improve diet and health, are becoming more and more popular in today’s society. Many people, looking for some way to improve health and wellness, have turned to nutritional supplements for help. This trend has created an endless supply of nutritional supplements and brands advertising them in slightly different, supposedly better forms. Is it simply a useless fad? Or do people really need nutritional supplements to improve their health? The fact is that, due to eating habits, food quality, and other environmental factors in our society, nutritional deficiency is a reality that is difficult to avoid. Taking nutritional supplements is necessary to combat nutritional deficiency.Modern eating habits have created a need for Nutritional SupplementsEating habits have changed dramatically over the last century. Low in nutrients but extremely high in convenience, fast food has become a daily part of life for many people. Fresh foods are preferable, but not always easy to obtain or convenient to use. Even the healthiest individuals find it nearly impossible to get all the necessary vitamins and nutrients from dietary sources alone. Very few people actually consume the seven to ten servings of fruits and vegetables that they should a day. Nutritional supplements can fill in important gaps in a normal diet. The vitamins and minerals that they contain contribute to overall health and a strong immune system. Keep in mind, however, that nutritional supplements only supplement a diet, they do not replace it.Nutritional Supplements and the decreasing quality of foodAs eating habits have slowly become worse, so has the quality of the food itself. It is nearly impossible for the average person to obtain the proper amounts of vitamin and minerals from modern processed food that is packed full of sugar and fat. Even vegetables and fruits are of a lower standard. In 1992, the United Nations Earth Summit found that vegetables naturally containing vitamins and minerals like copper, potassium, boron, magnesium, and bioflavonoids contain dramatically less than they did fifty years ago. Such diminished levels of vitamins and minerals can be made up for through the use of nutritional supplements. Not doing so can lead to nutritional deficiency and a slew of completely avoidable health problems.Other environmental factors and Nutritional SupplementsUnfortunately, our society and culture produce other factors that can be damaging to health. These include high levels of stress and pollution. Both can weaken the immune system and make people vulnerable to sicknesses that could be combated if the body was stronger. Nutritional supplements help the body’s immune system continue functioning at peak levels of performance and thereby protect itself from the constant bombardment of disease that we all face.Taking nutritional supplements helps the body maintain a healthy, efficient immune system. This, in turn, protects the body from harmful effects and diseases brought on by factors like eating habits, food quality, and our stress filled environment.

Finance, Credit, Investments – Economical Categories

Scientific works in the theories of finances and credit, according to the specification of the research object, are characterized to be many-sided and many-leveled.

The definition of totality of the economical relations formed in the process of formation, distribution and usage of finances, as money sources is widely spread. For example, in “the general theory of finances” there are two definitions of finances:

1) “…Finances reflect economical relations, formation of the funds of money sources, in the process of distribution and redistribution of national receipts according to the distribution and usage”. This definition is given relatively to the conditions of Capitalism, when cash-commodity relations gain universal character;

2) “Finances represent the formation of centralized ad decentralized money sources, economical relations relatively with the distribution and usage, which serve for fulfillment of the state functions and obligations and also provision of the conditions of the widened further production”. This definition is brought without showing the environment of its action. We share partly such explanation of finances and think expedient to make some specification.

First, finances overcome the bounds of distribution and redistribution service of the national income, though it is a basic foundation of finances. Also, formation and usage of the depreciation fund which is the part of financial domain, belongs not to the distribution and redistribution of the national income (of newly formed value during a year), but to the distribution of already developed value.

This latest first appears to be a part of value of main industrial funds, later it is moved to the cost price of a ready product (that is to the value too) and after its realization, and it is set the depression fund. Its source is taken into account before hand as a depression kind in the consistence of the ready products cost price.

Second, main goal of finances is much wider then “fulfillment of the state functions and obligations and provision of conditions for the widened further production”. Finances exist on the state level and also on the manufactures and branches’ level too, and in such conditions, when the most part of the manufactures are not state.

V. M. Rodionova has a different position about this subject: “real formation of the financial resources begins on the stage of distribution, when the value is realized and concrete economical forms of the realized value are separated from the consistence of the profit”. V. M. Rodionova makes an accent of finances, as distributing relations, when D. S. Moliakov underlines industrial foundation of finances. Though both of them give quite substantiate discussion of finances, as a system of formation, distribution and usage of the funds of money sources, that comes out of the following definition of the finances: “financial cash relations, which forms in the process of distribution and redistribution of the partial value of the national wealth and total social product, is related with the subjects of the economy and formation and usage of the state cash incomes and savings in the widened further production, in the material stimulation of the workers for satisfaction of the society social and other requests”.

In the manuals of the political economy we meet with the following definitions of finances:
“Finances of the socialistic state represent economical (cash) relations, with the help of which, in the way of planned distribution of the incomes and savings the funds of money sources of the state and socialistic manufactures are formed for guaranteeing the growth of the production, rising the material and cultural level of the people and for satisfying other general society requests”.
“The system of creation and usage of necessary funds of cash resources for guarantying socialistic widened further production represent exactly the finances of the socialistic society. And the totality of economical relations arisen between state, manufactures and organizations, branches, regions and separate citizen according to the movement of cash funds make financial relations”.
As we’ve seen, definitions of finances made by financiers and political economists do not differ greatly.
In every discussed position there are:

1) expression of essence and phenomenon in the definition of finances;

2) the definition of finances, as the system of the creation and usage of funds of cash sources on the level of phenomenon.

3) Distribution of finances as social product and the value of national income, definition of the distributions planned character, main goals of the economy and economical relations, for servicing of which it is used.

If refuse the preposition “socialistic” in the definition of finances, we may say, that it still keeps actuality. We meet with such traditional definitions of finances, without an adjective “socialistic”, in the modern economical literature. We may give such an elucidation: “finances represent cash resources of production and usage, also cash relations appeared in the process of distributing values of formed economical product and national wealth for formation and further production of the cash incomes and savings of the economical subjects and state, rewarding of the workers and satisfaction of the social requests”. in this elucidation of finances like D. S. Moliakov and V. M. Rodionov’s definitions, following the traditional inheritance, we meet with the widening of the financial foundation. They concern “distribution and redistribution of the value of created economical product, also the partial distribution of the value of national wealth”. This latest is very actual, relatively to the process of privatization and the transition to privacy and is periodically used in practice in different countries, for example, Great Britain and France.

“Finances – are cash sources, financial resources, their creation and movement, distribution and redistribution, usage, also economical relations, which are conditioned by intercalculations between the economical subjects, movement of cash sources, money circulation and usage”.
“Finances are the system of economical relations, which are connected with firm creation, distribution and usage of financial resources”.

We meet with absolutely innovational definitions of finances in Z. Body and R. Merton’s basis manuals. “Finance – it is the science about how the people lead spending `the deficit cash resources and incomes in the definite period of time. The financial decisions are characterized by the expenses and incomes which are 1) separated in time, and 2) as a rule, it is impossible to take them into account beforehand neither by those who get decisions nor any other person” . “Financial theory consists of numbers of the conceptions… which learns systematically the subjects of distribution of the cash resources relatively to the time factor; it also considers quantitative models, with the help of which the estimation, putting into practice and realization of the alternative variants of every financial decisions take place” .

These basic conceptions and quantitative models are used at every level of getting financial decisions, but in the latest definition of finances, we meet with the following doctrine of the financial foundation: main function of the finances is in the satisfaction of the people’s requests; the subjects of economical activities of any kind (firms, also state organs of every level) are directed towards fulfilling this basic function.

For the goals of our monograph, it is important to compare well-known definitions about finances, credit and investment, to decide how and how much it is possible to integrate the finances, investments and credit into the one total part.

Some researcher thing that credit is the consisting part of finances, if it is discussed from the position of essence and category. The other, more numerous group proves, that an economical category of credit exists parallel to the economical category of finances, by which it underlines impossibility of the credit’s existence in the consistence of finances.

N. K. Kuchukova underlined the independence of the category of credit and notes that it is only its “characteristic feature the turned movement of the value, which is not related with transmission of the loan opportunities together with the owners’ rights”.

N. D. Barkovski replies that functioning of money created an economical basis for apportioning finances and credit as an independent category and gave rise to the credit and financial relations. He noticed the Gnoseological roots of science in money and credit, as the science about finances has business with the research of such economical relations, which lean upon cash flow and credit.
Let’s discuss the most spread definitions of credit. in the modern publications credit appeared to be “luckier”, then finances. For example, we meet with the following definition of credit in the finance-economical dictionary: “credit is the loan in the form of cash and commodity with the conditions of returning, usually, by paying percent. Credit represents a form of movement of the loan capital and expresses economical relations between the creditor and borrower”.

This is the traditional definition of credit. In the earlier dictionary of the economy we read: “credit is the system of economical relations, which is formed while the transmission of cash and material means into the temporal usage, as a rule under the conditions of returning and paying percent”.
In the manual of the political economy published under reduction of V. A. Medvedev the following definition is given: “credit, as an economical category, expresses the created relations between the society, labour collective and workers during formation and usage of the loan funds, under the terms of paying present and returning, during transmission of sources for the temporal usage and accumulation”.

Credit is discussed in the following way in the earlier education-methodological manuals of political economy: “credit is the system of money relations, which is created in the process of using and mobilization of temporarily free cash means of the state budget, unions, manufactures, organizations and population. Credit has an objective character. It is used for providing widened further production of the state and other needs. Credit differs from finances by the returning character, while financing of manufactures and organizations by the state is fulfilled without this condition”.

We meet with the following definition if “the course of economy”: “credit is an economical category, which represents relations, while the separate industrial organizations or persons transmit money means to each-other for temporal usage under the conditions of returning. Creation of credit is conditioned by a historical process of fulfilling the economical and money relations, the form of which is the money relation”.

Following scientists give slightly different definitions of credit:
“Credit – is a loan in the form of money or commodity, which is given to the borrower by a creditor under the conditions of returning and paying the percentage rate by the borrower”.
Credit is giving the temporally free money sources or commodity as a debt for the defined terms by the price of fixed percentage. Thus, a credit is the loan in the form of money or commodity. In the process of this loan’s movement, a definite relations are formed between a creditor (the loan is given by a juridical of physical person, who gives certain cash as a debt) and the debtor.
Combining every definition named above, we come to an idea, that credit is giving money capital of commodity as a debt, for certain terms and material provision under the price of firm percentage rate. It expresses definite economical relations between the participants of the process of capital formation. Necessity of the credit relations is conditioned, from one side, by gathering solid quantity of temporarily free money sources, and from the second side, existence of requests of them.

Though, at the same time we must distinguish two resembling concepts: loan and credit. Loan is characterized by:

o Here, the discussion may touch upon transmission of money and also things form one side (loaner) to another (borrower): a)under the owning of the borrower and, at the same time, b) under the conditions of returning same amount or same quantity and quality of the things;

o The loaning of money may bear no interest;

o Any person may take part in it.
With the difference with loan, credit, which is somehow a private occasion of the loan, represents:

o One side (loaner) gives to the second one (borrower) only money, and _ for temporal usage;

o It may not bear no interest (if the assignment doesn’t foresee something);

o In it creditor is not any person, but a credit organization (at the first place, banks).
So, a credit is the bank credit. To our mind, it is not correct to use “credit” and “loan” as the synonyms.
Banking crediting is the union of relations between bank (as a creditor) and its borrower. These relations touch upon:

a) Giving a certain amount of money to the borrower for definite purpose (though, we meet with the so-called free credits, aims and objects of crediting are not appointed in the assignment);

b) Its opportune returning;

c) Getting percentage rate from the borrower for using the sources under his/her disposal.
The essential foundation of the credit essence and its important element is existence of trust between the two sides (in Latin “credo”, from which comes the word “credit”, means “trust”).
From the position of circulation of money forms (in the abstraction, historical process of formation economical relations and social budget and banking systems expressed by them) comparing different definitions of finances and credit, the paradox conclusion appears: credit is the private occasion of finances. And truly, from the position of movement of the money forms, finances represent the process of formation and usage of the funds of cash means. Very often such movements are fulfilled without returning, but sometimes, it is possible to give loans from the budget for the investment projects of other needs. Also, when a manufacture or corporations use their cash funds and we mean the finances of industrial subject, such usage may be realized as inside the manufacture or corporation (there is no subject about returning or not returning of the usage), so gratis under conditions of returning. This latest is called commercial form because of transmitting the sources to others, but even in this occasion, it is the element of financial system of the manufacture and corporation.

From the point of cash means movement, main character of credit is the process of formation and usage of the funds of cash means under the conditions of returning and, as a rule, taking the value-percentage. If gating the credit value doesn’t take place (even in the exceptional occasions), according to the movement form, credit becomes a private occasion of finances, as from the net financial funds (consequently from the state budget) the loans which bear no interests may be used. If gating credit value takes place, by the appearance form, credit is discussed to be financial modification.

From the historical point of view, finances (especially in the sort of the state budget) and credit (beginning with usury, later commercial and banking) were developing differently for considering credit to be the part of finances. Though, from the genetic-historical point of view, previous loaners, before giving loan, needed gathering the permanent capital not returning, that is the net financial foundation. The banks analogously needed concentration of the important own capital for influxing the consumers’ means and for getting higher percentage rate under the conditions of returning. Herewith, exactly on the financial basis, in the sort of financial fund (which later partially becomes loan fund) part of the bank capital appears to be the reservation (insurance) part of the fund, which by nature is financial and not loan. So notwithstanding the essential distinctions between finances and credit form the genetic-historical point of view, credit appears to be formed from finances and represent their modification.

From the essential position of expressing economical relations of finances and credit, we meet with cardinal distinctions between these two categories. Which mostly expressed by the distinction of the movement forms notwithstanding they are returnable or not. Finances express relations in the aspects of distribution and redistribution of social product and part of the national wealth. Credit expresses distribution of the appropriate value only in the section of percentage given for loan, while according to the loan itself, a only a temporal distribution of money sources takes place.
Herewith, there is a lot of common between the finances and credit as from the essential point of view, so according to the form of movement. At the same time, there is a significant distinction between finances and credit as in the essence, so in the form too. According to this, there must be a kind of generally economical category, which will consider finances and credit as a total unity, and in the bounds of this category itself, the separation of the specific essence of the finances and credit would take place.

Funding of the cash means is common to the researched economical categories. It takes place in any separate system of finances and credit, which have been touched upon during the analyses of defining finances and credit. Word combination “funding of the cash sources (fund formation)” reflects and defines exactly essence and form of economical category of more general character, those of finances and credit categories. Though in the in economical texts and practice, it is very uncomfortable to use a termini, which consists of three words. Also, “unloading” with an information hardens greatly its influxing into the circulation even in the conditions of its strict substantiation and thoroughness.
In the discussing context we consider:

1) wide and narrow understanding of economical category of the finances;

2) discussing finances in narrow understanding under general traditional meaning;

3) discussing finances, as funding of the cash means, in wide understanding, which concerns finances – in narrow meaning and credit – in complete meaning.
Termini “funding” and its equivalent “fund formation” are used by us as the purposeful structuring of cash means, which is based on two poles – accumulation of money sources (gathering) and its usage for definite purpose in the way of financing and crediting.
We have established a new termini – “finance-investment sphere” (FIS). Analyses about interrelation of finances and credit made by us give us an opportunity of proving, that in the given termini, the word “financial” is used with the meaning of funding cash sources, its purposeful structuring. In this process we consider at the same time financial, credit and investments’ economical categories.

Let’s sum up middle results of discussing new concept – “finance-investment sphere” and discuss its investment consisting parts.

The concept “investments” was brought into the native economical science from the West. In the Soviet economical science they for a long time used in the place “investments” the termini “capital placement”, which expressed the usage of the industrial factors in the sphere of real industrial activities during realization of capital projects. From one glance, this termini in its concept is identical to the “investments”, consequently it is possible to use them as synonyms. Though the termini “investments” and “investing” have the advantage towards the termini “capital placement” from linguistic and philological points of view, because they are expressed with one word. This is not only economical and comfortable in the process of working with the termini “investment” itself, but also it gives an opportunity of termini formation. More concretely: “investment process”, “investment domain”, “finance-investment sphere” – all these termini are much more acceptable.
Changing native economical termini with foreign ones is purposeful, if it really matters (by keeping parallel usage of the native termini for the inheritance). Though we must not change native economical termini into foreign ones all together, when by ordinal traditional language easy to explain private and narrow concrete processes and elements get their own termini. The “movement” of these termini is approved in the narrow professional bounds, but their “spitting out” into the economical science may turn economical language into the tangled slang.

Let’s discuss termini – “investment” and “capital placement’s” usage in the economical literature.
Investments are placement of funds into the main and circulation capital for the purpose of getting profit. “Investments in material assets – are the placements of funds into the mobile and real estate (land, buildings, furniture and so on). Investments in financial assets are the placements of funds into the securities bank accounts and other financial instruments”.

We don’t meet with the termini “investments” in the earlier economical dictionary, but we meet the combined termini “investment policy” – the union of the industrial decisions, which guarantee main directions of the capital investments, the activities of their concentration in the determinant suburbs, on which the reaching of planned rates of development of the society production is depended, balancing and effectiveness, getting more and more production and profit of the national income for every lost Ruble”. For today, in the most actual definitions, the capital investments are bounded only by financial means, when not only financial, but also the investment of natural, material-technical and informational resources takes place. Labour resources take an actual place in the investment process. They themselves fulfill this or that investment process.

A positive side of the discussed definitions is that they connect investment policy and capital placements (investments):

- economical development according to the key directions to the concentration;

- providing high rates of economical growth;

- raising an economical effectiveness, which is expressed:

a) by growing the throw off of the production and national income for every lost Ruble;

b) by fulfilling the branch structure of the investments;

c) by improving their technological structure;

d) by optimization of their further production structure.

Compared with such definition of the investments (capital placement) the definition of investments in the dictionary attaching the “Economics” seems to be unimproved: “investments – the expenses of gathering production and industrial means and increasing material reserve”. In this definition current expenses (production expenses) are mixed with the investment (capital) expense. Also, not the investment expenses but (though the investments are followed by the appropriate expenses) exactly advancing. It differs from the expenses by that the means (means) are put by returning the advanced values, also, under the conditions of growth, to which the concept-advanced capital is corresponding. the advancing may be realized in the money, natural-material and informational forms.

Except the termini “investments”, there are two more termini related with the investment. They are shown below.

“Human capital investment” – any activity provided for rising the workers labour productivity (in the way of growing their qualification and developing their abilities); at the expenses of improving the workers’ education, health and raising the mobility of the working forces”. It is very useful to use the mentioned termini, though it needs one correction: the human capital investments do not concern only workers, but also the servants, representatives of every kind of labour.
“Investment commodity, capital goods – a capital.”

In the official manuals of political economy of the reformation time the capital investments are discussed as “expenses for creating new main funds and widening, reconstruction and renewing the active ones”. In this definition the investments (capital placements) during separation of the forms (types) of further production of the main funds are bounded only by main funds (without increases of the circulation funds and insurance reserves):

a) creating new ones;

b) widening;

c) reconstruction;

d) renewing.

Also, the concept of the industrial gathering appears, at the expenses of widening of basic, circulation funds and also insurance reserves takes place”.

You’ll meet below the definitions of investments from “the course of economy”: the investments are called “placements of fund into the basic capital (basic means of production), reserves, also other economical objects and processes, which request long-termed influxing of material and cash means. “According to the division of capital into physical and money forms, the investments too must be divided into material and cash investments”.

They apportion investment commodity, to which belong industrial and nonindustrial building objects, vehicles purposed for changing or widened technical park and the furniture, increasing reserves and others.

“They call the total investments of production an investment product, which is directed towards keeping and increasing the basic capital (basic means) and reserve. Total investments consist of two parts. One of them is called the depreciation; it represents important investment resources for compensation of renewal till the level of before industrial usage, wearing out and repairing of the basic means. Second consisting part of the total investments is represented by net investments – capital investments for the purpose of increasing basic means”. Depreciation is not a compensation resource of wearing the basic funds out, but it is the purposeful financial source of such resources.
Human capital investment is “a specific kind of investments, mostly in education and health protection”.

“Real investments are the investments in the economical branches and also, they are kinds of economical activities, which provide influxing the increases of real capital, that is increasing material values of the industrial means”. We can agree with such definition with one specification that material and nonmaterial values too belong to the real capital (wealth), consequently science-researching experimental-construction results, various information, education of he workers and others. Such service as organization of the excitable games, also the service of redistribution social wealth from one private person to another (except charity).

“Financial investments represent placement of funds into the shares, obligations, promissory notes, other securities and instruments. Such investments, of course, do not give increases of the real material capital, but they help getting profit, consequently at the expenses of changing the course of the securities in the time of speculation, or distinguishing the course in different places of sell and purchasing”. We share wholly such definition, hence it follows that financial investments (if it is not followed by real investments as a result) do not increase real material wealth and real nonmaterial wealth. According to this context, the expression below is very important: “we must distinguish financial investments, which represent placement of the funds in the ways of selling and purchasing the securities for the purpose of getting profit and financial investments, which become cash and real, moved to real physical capital.”

In the “economical course” quoted before long and short-termed investments are separated. Recognizing the existence of the bounds between them, the authors ascribe short-termed investments to “one month or more” investments. If we get such conditioned criteria, that we can call the investments which overcome the terms of some months, long-termed ones, which is very doubtful and we don’t agree with it. A long-termed character of the fund placement is a significant feature of the investments (short-term doesn’t combine with the concept of investments). Principally, it would be better to point out quick compensative, middle termed compensative and long-termed compensative investments:

- less then 6 months – quick compensative;

- from 6 months up to the year and a half – middle termed compensative;

- more then the year and a half – long termed compensative.

We stopped at the definition of the investments in the capital work “economical course” for the special purpose, as, in it the author tried to discuss the concept of investments systemically and quite completely, herewith the book is published just now.

We’ll return to the discussion the definition economical category of “investments” in different publications in the following chapter. The definitions given here are quite enough for having a notion of the level of lighting up the given category in the economical literature.
What conclusions may be made according the definition of the mentioned economical category in the published works, except the made notions and specifications?

There is quite deeply, concretely and thoroughly defined the concept of “investments”, different definitions in the economical literature; but mostly in every works about the investments discussed by us until now, there is not opened the essence of investments as an economical category. In every monograph , even if it has a title investment, as an economical category , there is given only the definition, concept of investments. But, as the Academician Vasil Chantladze explains, “a concept is a discussion, which proves something about the distinguishing feature of the researched object. A concept out of much essential characteristic features represents only one, and essential in it is only – definition”.

But the categories are much wider; it is “a key, the most fundamental concept of every science”. Economical categories theoretically represent real, objectively existed productive relations. A category is the defining of occasions of existed characters, connections, relations of the objective world. Generally, any educational process is fulfilled by the categories, which give opportunities for dividing the processes and occasions semantically, for expressing the definitions of a subject and realize their specific peculiarities and economical relations of a material world.
Our goal is exactly to substantiate investments – as an economical category and also, as a financial category in the narrow understanding.

Here we apply for another manual thesis made by the academician Vasil Chantladze: “every financial relation is an economical one and every financial category is and economical one, but not every economical relation and economical category is financial relation and financial category”.
In the process of defining the investments, it is important to take in mind the sides of resources, expenses and incomes, because investment, from one side, is the result of the manufacture’s activity, and, from another one, – a part of income, which, in this case, is not used for usage.
Another occasion: it is advisable to discuss investments in two aspects: as a category of reserve and flow, which will reflect exactly the connection between “placement of funds” and “investments”.